11KV 1 × 800mm2 XLPE AWA PVC Medium voltage cable MV cable
¿Qué es 11kV 1×800mm2 XLPE AWA PVC Cable de media tensión MV Cable ?
11kV 1×800mm2 XLPE AWA PVC Cable de media tensión MV Cable es trenzados de cobre（Cu） o aluminio（Al） con aislamiento XLPE, cable screens and copper tape and cable armor (AWA) available for voltage ratings of 6.35/11 kV; Manufactured in accordance with BS6622 (PVC cover) o BS7835 (low smoke and halogen free cover), IEC 60502
Estándar de 11kV 1×800mm2 XLPE AWA PVC Cable de media tensión MV Cable
BS 6622: British standard 6622 – “Electric cables. Armored cables with thermosetting insulation for nominal voltages of 3,8/6,6 kV a 19/33 kV”
BS 7835: British standard 7835 – “Electric cables. Armored cables for nominal voltages of 600/1000 V y 1900/3300 V, with thermosetting insulation and low emission of smoke and corrosive gases when affected by fire”
IEC 60502-2: Norma 60502-2 of the International Electrotechnical Commission – “Power cables with extruded insulation and their accessories for nominal voltages of 1 kV (One = 1,2 kV) until 30 kV (One = 36 kV) – Part 2: Cables for nominal voltages of 6 kV (One = 7,2 kV) until 30 kV (One = 36 kV)”
Datos técnicos de 11kV 1×800mm2 XLPE AWA PVC Cable de media tensión MV Cable
Conductor Cobre trenzado de clase 2 o Class braided aluminum 2 800mm2
Driver shield Semiconductor cross-linked polyethylene (XLPE)
XLPE insulation 3.4 mm
Pantalla del aislamiento XLPE semiconductor
Metal screen Tape and/or copper cables in general (núcleo único) o individual copper strap (three cores)
Stuffed (as required) Polyethylene terephthalate fibres (PET)
Separator binding tape
Polyvinyl chloride bed (PVC) Compuesto de baja emisión de humos y cero halógenos (LSZH) N/A
Armor Unipolar Cable: aluminum wire armor (AWA)
Cable multipolar: steel wire armor (SWA) N/A
PVC or medium density polyethylene cover (MDPE) LSZH MDPE o LSZH
11KV XLPE AWA PVC application medium voltage cable
11KV 1 × 800mm2 XLPE AWA PVC MV Cable is suitable for applications where a reliable and safe electrical distribution is required to tensions of 11 kV, with a single large cross section copper conductor protected by XLPE insulation, Steel wire armor for mechanical strength and PVC jacket for additional protection from the environment. This type of cables is commonly used in electrical distribution networks to power industrial areas., commercial and residential through underground or buried systems.